The Dos and Don’ts of Pressure Washing Brick Wall

Pressure washing brick wall can be a daunting task. Not only do you have to worry about the pressure of the water blasting away at the dirt and grime, but you also have to be careful not to damage the bricks in the process. It is important to follow some simple dos and don’ts when pressure washing brick wall to ensure that the job is done right. If you’re not careful, you could end up causing more harm than good. We’ve compiled a list of some pressure washing tips to help you get started.

When pressure washing a brick wall, the first thing you need to do is make sure that you’re using the right type of equipment. A pressure washer that is too powerful can easily damage the bricks on your wall. Here are the dos and don’ts of pressure washing a brick wall:

DO:

• Use a pressure washer with adjustable pressure settings: This will allow you to control the amount of pressure that is being applied to the bricks, which will help prevent damage. You should start with a lower pressure setting and increase it if necessary.
• Use a power washer with a fan tip attachment: This attachment will help to evenly distribute the pressure over a larger area, which will help prevent damage. Always start with the widest setting and then narrow it down if needed. This will help to avoid damaging the bricks.
• Hold the pressure washer at a 45-degree angle when pressure washing a brick wall: This will help to avoid damaging the bricks. Make sure that you’re not holding the pressure washer too close to the wall, as this could also damage the bricks.
• Move the pressure washer in a side-to-side motion when pressure washing a brick wall: This will help to evenly distribute the pressure and avoid damaging the bricks. Make sure that you’re moving the pressure washer at a consistent speed to avoid damaging the bricks.
• Rinse the bricks with clean water after pressure washing them: This will help to remove any residual dirt or grime that could damage the bricks.

DON’T:

• Use a pressure washer with a fixed setting: This could result in the pressure being too high and damaging the bricks. Make sure that you have a pressure washer that allows you to adjust the pressure.
• Use a pressure washer with a zero-degree nozzle: This type of nozzle concentrates all of the pressure in one small area, which can easily damage the bricks. Stick to a fan tip attachment to help evenly distribute the pressure.
• Hold the pressure washer directly against the bricks: This could result in damage to the bricks. Always hold the pressure washer at a 45-degree angle. You should also avoid holding the pressure washer too close to the wall.
• Move the pressure washer in a circular motion: This could result in damage to the bricks. Always move the pressure washer in a side-to-side motion.
• Leave the bricks wet after pressure washing them: This could result in damage to the bricks. Always rinse the bricks with clean water after pressure washing them.

By following these simple dos and don’ts, you can pressure wash your brick wall without damaging it. Just make sure that you’re using the right type of equipment and that you’re holding the pressure washer at the correct angle. If you’re still not sure, you can always contact a professional pressure washing company for assistance.